Jianjun Hu

Update G36 sequences based on the official release version

11

This is to create a staging branch for upgrading guideline 36 sequences.

Issue2948 motor drive

2

This closes #2948.

Correct comment: - [ ] In `Buildings.Controls.OBC.CDL.Integers.Change`, the comment of `pre_u_start` should be `Start value of pre(u) at initial time`.

Add duty cycle blocks in CDL.Logical

1

This issue is to add duty cycle blocks as discussed in ASHRAE231p meeting: - [x] `CDL.Logical.ConstantDutyCycle`: produces an output that cycles on and off according to the specified length of...

This closes #819. - [x] added main namings adopted by chiller plant control sequences

Create nomenclature conventions

1

This issue intends to create naming conventions for CDL.

ISAT models

12

This PR is to merge the ISAT models developed by the CU Boulder Data Center project. @caryfaulkner I see in this commit 8a34bcd, the release note should have been updated....

This issue is to add vendor annotation to the cdl control sequences, for generating point list. See [section 7.7.4 Point list](http://obc.lbl.gov/specification/cdl.html#point-list) of OBC specification.

Reimplement validation tests based on the session of reviewing the open loop test

2

- [ ] double check the PID controller activing behavior. In RP-1711, `direct acting` means when measured value increase, the PID controller output should increase. In current PID control, `direct...

Add vendor annotation to flag the non-G36 parameter values, instance

1

The sequences in `Buildings.Controls.OBC.ASHRAE.G36_PR1` would include instances that are not from the G36, or the parameter values are not referred from the guideline. This issue is to add flag to...