JannGold
JannGold
I can see if reverting the ram back to stock will work. It has 416MB right now. Occasionally, It will boot. Only one time it did.
Unfortunately, no dice.
It crashes after first completing the setup after setupldr and shows the bootscreen. The screen after where you configure drivers and before the hard disks.
What kind of issue with the CUDA is it?
I also tried imaging the drive from my WallStreet to the beige G3 and I got the same crash. This is after a full install.
I think I found a fix. Hold down Command+Option+O+F, type init-nvram, then shut-down, then turn the system back on and start NT.
I found out that you need to install it on a Wallstreet or PDQ first. Then you need to start NT. It may not work on the first try. If...
Will this work on Sawtooth G4 models once it is ported? I think those are Uni-North.
@Wack0 I got it to work on my 500 MHz Powerbook FW Pismo. It worked first try.
> As mentioned in the previous issue that you closed, the ATI Rage Pro DSP timing code is incorrect, there's slight screen artifacts produced, but it's mostly working. > >...