Derrick James

Try removing all the other connections ie stepper an fan cables etc. That's what I had to do m theory is t was trying to feed power to the components...

It took a little persuasion to get mine to connect. On a windows computer I went under device manager and deleted all of the com ports. Took the board completely...

Try dissconnecting everything from the board. Worked for me On Wed, Jul 28, 2021, 2:51 PM PrideParrot ***@***.***> wrote: > Cheched variant with smaller SD card - with no result....

It is not but I thought the situation with the thermal runaway warranted someone looking into it. The board will connect to the pc but the software will not recognize...

Yep. Had the pins switches on the z endstop w/ a bltouch....not entirely sure why I caused the heater issues On Sat, Jul 3, 2021, 12:26 PM Luke Harrison ***@***.***>...

Thank you . It was very confusing because the sample klipper config pointed to expansion pins as uart pins for the 2208s. Thank you. On Tuesday, June 1, 2021, Jasonpenman...