MHefny

"18337 Webots2012b compatibility (@HefnySco)" yes. Webots2021b is replacement of old one and the old files are not compatible with it.

Hi, Thank you for following me. Actually I am looking into integrating Linux based boards with multiple small STM32 microprocessors to make use of computational power of large boards and...

I havent made a dedicated PCB yet for it. You need to connect it next to OBAL.

I am developing this solution almost finished. On Fri, Feb 24, 2023, 23:25 xagawar ***@***.***> wrote: > Is it possible to use OBAL with MangoPi MQ-Quad MCore-H616? > > —...

I have just received my MangoPI MQ-Quad, I face a very strange problem, i2cdetect cannot detect my I2c devices. I have three i2c buses. Do you have any feedback in...

I have made some modification to ardupilotcode to run BananaPi W2 https://github.com/HefnySco/ardupilot/tree/pr_banana_zero my only problem is RCInput. It you can replace it with RC_UDP ot will work. Now I am...

Hi, Sorry for this delay. I missed the question. check this [link](https://github.com/HefnySco/OBAL/wiki/06---Build-and-Install#running-service) please. `ExecStart=/home/pi/ardurover -A udp:**YourTargetIP**:14550:bcast -B /dev/serial0 ` 1- you can set your IP to match your target GCS....