Hedda
Hedda
For your information, ZHA integration in Home Assistant uses zigpy library for OTA, see zigpy feature request -> https://github.com/zigpy/zigpy/issues/1060 Once such OTA provider is zigpy then can use OTA in...
> @Hedda when testing with ZHA I was downloading the firmware manually. ZHA did attempt to do the OTA (meaning that the firmware was correctly picked up) but it remained...
If you still have that specific problem with it hanging at 0% when trying to update correct the OTA firmware image with the ZHA integration in Home Assistant (which depends...
Assuming that you have already updated the [ZLinky_TIC Router v9.0 firmware pre-release image](https://github.com/fairecasoimeme/Zlinky_TIC/releases) on your Zlinky TIC then you will still need to wait for next ZHA Device Handlers (zha-quirks)...
> Z2M have getting EZSP with protocol version 8 up and running and is beta stage. [Koenkk/zigbee-herdsman#319](https://github.com/Koenkk/zigbee-herdsman/issues/319) Small correction; the new EZSP support in Zigbee2MQTT / zigbee-herdsman is only in...
@walthowd Please review this if and when you have time as per https://github.com/walthowd/husbzb-firmware/issues/38 and tested with firmware from https://github.com/grobasoz/zigbee-firmware/issues/15 Note new firmware require defining a baud rate of 115200 instead...
> FYI, Elelabs has now released EmberZNet v6.10 firmware for their EFR32 based adapters (based on EFR32MG12): > > https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/blob/master/data/EFR32MG13/ELE_MG13_zb_ncp_115200_610_211112.gbl > > [Elelabs/elelabs-zigbee-ezsp-utility@31f8e9c](https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/commit/31f8e9c09d612734edbe41619240162fe595ecc5) FYI, Sonoff has now also released Silabs...
I believe that only EFR32MGxx MCU chips (like EFR32MG12 and EFR32MG21) may use EmberZNet 6.8 and later or do I remember that incorrectly? I know that EM35x and EM358x are...
> As Gary have saying Silabs have doping the active support for EM35X devices and also EFR32MG1X I did not know that Silicon Labs were already dropping support for EFR32MG1X...
FYI, grobasoz has now also started to compile and release EmberZNet 6.10 / 6.10.x.x firmware images for EFR32 / EFR32MGxx: https://github.com/grobasoz/zigbee-firmware That is in addition to EmberZNet 6.10 / 6.10.x.x...