Hedda
Hedda
Yeah, this new "ZBDongle-E" adapter apparently uses a WCH CH9102F (CH9102/CH340 device drivers) for USB-to-UART chip which has VID (Vendor ID) "`1A86 `"and PID (Product ID) `55D4` as well as...
> I managed to upgrade my BV AV2010/10 USB-Stick with the above linked f/w today i used the walthowd docker image and a bit of editing the npc.py Maybe best...
> are you able to add support for em3587 Bitronvideo BV 2010/10. [grobasoz/zigbee-firmware#15](https://github.com/grobasoz/zigbee-firmware/issues/15) links to the correct firmware FYI, "Bitron Video AV2010/10 USB-stick" is also sold as "SMaBiT AV2010/10 USB-stick",...
FYI, more users confirm EmberZNet 6.7.10 firmware working good on EM3587 here -> https://github.com/grobasoz/zigbee-firmware/issues/15
If flashing of the correct firmware image was done properly and successfully then suggest as in -> https://github.com/Koenkk/zigbee-herdsman/issues/319 Note that EZSP support in Zigbee2MQTT (Z2M) is experimental with initial support...
Same firmware developer GitHub repo also hosts firmware EFR32MG21 based "SM-011 V1.0" modules by CoolKit-Technologies: https://github.com/xsp1989/zigbeeFirmware/tree/master/firmware/SM-011 "SM-011 V1.0" modules can be found on Aliextress and is used in some hobby...
Would also be great it could get a Zigbee Router firmware for ITead Zigbee 3.0 USB Dongle and "SM-011 V1.0" as well. https://github.com/grobasoz/zigbee-firmware/issues/11 https://github.com/xsp1989/zigbeeFirmware/issues
@walthowd FYI, grobasoz has started compiling 6.7.10.0 / 6.7.10 firmware for older EM358x/EM3581 and ETRX35x/ETRX357 chips: https://github.com/grobasoz/zigbee-firmware https://github.com/grobasoz/zigbee-firmware/commits/master
_Originally posted by @grobasoz in https://github.com/grobasoz/zigbee-firmware/issues/17#issuecomment-998395507_ > I have updated the EM3581 versions including walthowd's specific release. PC5 is used for TX Active and PC6 for nTX Active. @walthowd FYI,...
> I tried the 115k2 variants for my HUSBZB-1 with no luck so far using the script. Left a note on the issue in Gary's repo. No success flashing firmware...