Hedda
Hedda
FYI, both NotEnoughTech and digiblur have received theirs and while neither of them has tried to flash/hack it yet they posted some early thoughts on the original eWeLink hub firmware...
FYI, there's now a detailed step-by-step instruction about flashing Tasmota on ZB-GW03 eWeLink Ethernet Zigbee Gateway (wired network bridge) for Zigbee2Tasmota (also using with Home Assistant's ZHA): https://thehelpfulidiot.com/a-wired-sonoff-zigbee-alternative Again, basic...
@thegroove FYI, syssi started work on ESPHome configuration for ZB-GW03 -> https://github.com/syssi/esphome-zb-gw03 He is referencing your work on ESPHome for ITead's Sonoff ZBBridge as well as Tube's gateways as inspiration...
FYI, maybe relatest comment from xsp1989 posted on router firmware posted on https://github.com/arendst/Tasmota/discussions/11536 "This firmware can ground the PA00 5S into pairing mode, and ground the RST to restart routing....
FYI, @xsp1989 has now uploaded/shared a signed Zigbee Router firmware for ITead's Sonoff ZBBridge to his google drive here: > https://drive.google.com/file/d/1H-M5CTh_XGGVl2te4vHLQ5SfGPHL6yCS/view?usp=sharing > > This is the signed routing firmware used...
Update from xsp1989 on router firmware posted on https://github.com/arendst/Tasmota/discussions/11536 "This firmware can ground the PA00 5S into pairing mode, and ground the RST to restart routing. UART is used to...
Check out this new "How to Convert the Sonoff Zigbee Bridge into a Router / Repeater" blog article by @digiblur here: https://www.digiblur.com/2022/02/convert-sonoff-zigbee-bridge-to-router-repeater.html Note that the article already assumes that you...
FYI, the same Zigbee Router firmware has now also been tested with ESPHome on a ZB-GW03 eWeLink Ethernet Zigbee Gateway which is based on ESP32 instead but have the same...
> I'll have to look into this, but at first glance, it seems logical to me to set up zeroconf for a generic EZSP serial gateway type, as in the...
> At this point I don't know how ESPHome sets up mdns/zeroconf and how hard it is to tap into that from an external custom component, but I'll investigate. I...