Ghostkeeper

It looks like your problem, as you describe it and as it's seen in the project file, is not really with the gap filling technique but rather with wall overlap...

Agreed, this would be nice. We already have an issue in our internal tracker since last year (CURA-994, created in March 2016). Unfortunately, according to the planning, it ended up...

This is something that should probably have been reported to the Cura repository. Tickets here hardly get any visibility. I'm quite intrigued. What I gather from this story is a...

This is a problem with settings, but more specifically it's a problem with the default end g-code of the Ultimaker Original+. It has this line: G28 X0 Y0 ;move X/Y...

Yes, it should move the head away before signalling end-of-print, because the end-of-print takes a while to process, retracts the filament, etc. Directly moving vertically tends to leave a little...

You like it just for its aesthetics, do you? It doesn't seem useful in any way and would certainly give quite some trouble with overhang above infill... You could also...

Our project manager just removed this feature from our planning because it's older than 12 weeks.

Could add Cross infill to that mix. It can already be tested in Cura 4.12 by setting the number of bottom layers to 0 and the infill density to 100%....

Ideally the `center_object` option would look at the bounds of the model in order to centre it in the build volume. The coordinates of the centre of the build volume...

I have no idea how to debug a thing like this except to search for similar problems online. And I found one here: https://forums.virtualbox.org/viewtopic.php?f=2&t=92944#p448138 One suggested fix is to allow...