Ghostkeeper
Ghostkeeper
Not a problem if you don't mind those extra travels or that it's filling that thin part 100% instead of the selected infill density. It's all a big balancing act,...
Yeah, the infill might be too dense or too sparse depending on where the infill lines end up. On average it should be the correct density, but locally it will...
I'd love to see that project file indeed. You can send it to [r dot dulek at ultimaker](https://github.com/Ultimaker/Cura/blob/792f81315b438bc09d222db10f3960c3099b8388/resources/i18n/de_DE/cura.po#L8) if you like. It looks like the branch of tree support is...
Thank you! With this project file the issue reproduces. We'll discuss this with the team.
We've decided to put this fairly high up in the backlog. Hopefully we can fix it for 4.8.
This was fixed in version 4.8, through this PR: https://github.com/Ultimaker/CuraEngine/pull/1319
Retracting during a printing move is generally a bad idea. The acceleration limit kicks in really quickly then, and causes the X/Y movement speed of the nozzle to slow down....
I'm purposefully running a week behind on Github notifications to allow other people to respond before me. I also see the ping one week later. But since nobody did... The...
What does Cura's log file say? It will indicate that it's waiting for a connection, normally on port 49674, but incrementing the port number if that port is busy (e.g....
A couple of comments while you're working on this, to address the questions you've posed and some concerns: * Code style and naming conventions for C++ is a combination of...