Ghostkeeper

What we should've written down here is that we could reproduce the issue and found that it only happens if the Optimize Wall Printing Order is enabled. Please write down...

For one, it would be nicer to inherit from the Ender 3 (v1) profile if it's just the size that is different, and then override just that size. That way...

Because the newer bridging routine is not as well tested for print quality as the old one. It's not just more settings but a different algorithm to detect bridges and...

The linked video talks about the defect caused by splitting and joining lines being aligned vertically. This is not an issue for the top/bottom pattern because it doesn't split/join lines....

Probably harmless, but there's several unnecessary setting overrides in that command: * `infill_pattern=lines` is set twice. * `machine_always_write_active_tool` is set to what is already the default. * `mesh_rotation_matrix` is set...

There were no real changes in 4.7 vs. 4.8 in the defaults in fdmprinter. The only meaningful change was in the shrinkage compensation factor setting which changed their units from...

Google says to look at power settings, such as this in Windows: https://youtu.be/bheUmk2qEp4?t=82 Or this in the BIOS: http://forum.asrock.com/forum_posts.asp?TID=7890 Edit: Because this issue has gotten some traction and is quite...

We have a similar report on Ultimaker's forum now: https://community.ultimaker.com/topic/26654-cura-crashes-my-entire-computer/

It's very hard to say something about this issue :disappointed: We don't know what's causing it or why it only happens with Ryzen. We also don't have any computers here...

That means that the configuration files got corrupt. It may have happened during saving of profiles.