JoAnn Manges

> **GadgetAngel** Thanks for the answer. I will report a bug. I will try all the options. If this is Marlene's mistake, then there is no need to send the...

@fox631 Please report the bug here: https://github.com/MarlinFirmware/Marlin/issues EDITED: Here is **a work-around that solves your problem!** You will need to update the configuration for your specific printer. I did the...

> @GadgetAngel, I did it. The sensor is working. I made a software connection, according to your diagram, and with your firmware "Marlin-SKR-MINI-E3-V1.2-fix". For some reason, the firmware turned out...

> Good afternoon. Which option is better to use for the MAX6675 with SKR PRO 1.2, and is there even such an option for the MAX6675 with K-type? I hardly...

> Hey @GadgetAngel, great comprehensive guide. I am looking at integrating PT100+MAX31865 using software SPI on the SKR E3 TURBO. I have a few questions I hope you can help...

> The SKR Pro v1.2 has a 6 pin header for SPI. It's on the right side just below the serial connector for the display (south east of the last...

> Thanks for this great write-up, very much appreciated! > Quick one on using K-type; this works with Marlin sorta out-of-box on GTR > For RepRap (Gloomy FTW!) I have...

Please check this out maybe it can help: https://github.com/KevinOConnor/klipper/issues/2741

@eeyoredave please post your config file for klipper. Also, please attach the Klipper log file for the SKR PRO V1.2. For information on obtaining the Klipper log file see: https://github.com/KevinOConnor/klipper/blob/master/docs/Contact.md...

@Necropaw Try compiling Marlin 2.0.2 using the default Platformio.ini. I mean do not change the compile directive for the TMC stepper library. BIGTREETECH stepper motor library is out of date....