JoAnn Manges

> Was this ever resolved? I am experiencing this ### NO, the issue has not been resolved I am still getting warnings:  ...

@DrumClock from what I am learning at least on the SKR V1.x board the boot loader resides from 0x08000000 - 0x08007FFF so your compiled firmware starts at address 0x08008000. From...

I already own or have purchased all the BIGTEETECH boards **except for ONE**: **SKR min E3 V1.0, does anyone know where I can get my hands on one?** This repository...

@LightTribe-art I am still learning about all this so it will not take some time. I agree with you tho, having to update via SD card is not really necessary....

> @GadgetAngel : Thank you for all your work; very tedious (among other adjectives) what you've done, but you've probably rescued 1000's of users of BTT boards! Well 100's in...

> @GadgetAngel > As you have written, so shall it be done! Within some definition of "margin of error." > > I have not updated the firmware on this board...

> I apologize for the 2xpost... was not sure with the other issue closed anyone would see it. So I'm referencing here: > > [#45 (comment)](https://github.com/bigtreetech/BIGTREETECH-GTR-V1.0/issues/45#issuecomment-863606965) > > I admit,...

> 24V fans are pretty hard to find. On the next revision of the hardware it might be nice to include a jumper to select either the 12/24V rail or...

> Please Provide the Bootloader of the GTR. > Mine got damaged! > > Best The GTR V1.0 is based on the SKR PRO board. Both the GTR V1.0 board...

> Nope.they are different! GadgetAngel schrieb am Mo., 21. Sept. 2020, 17:36: > […](#) > Please Provide the Bootloader of the GTR. Mine got damaged! Best The GTR V1.0 is...