Jose M. Escrich
Jose M. Escrich
Try mine: https://www.printables.com/model/927675-caja-para-btt-pi-btt-pi-box-frontal-front
[mcu BTT-Pi] serial: /tmp/klipper_host_mcu [temperature_fan BTT-Pi_CPU] # Temperatura interna del procesador de la BTT Pi pin: BTT-Pi:gpio211 max_power: 1.0 shutdown_speed: 0 sensor_type: temperature_host target_temp: 40 max_temp: 85 min_temp: 5 control:...
Check the names you used
Just doing this control, will be a good idea to make a proportional control, instead of the simple on/off control that Raspberry have
Will be a great advantage, to have a plain text file associated to Moonraker database, where, using same Fluidd or mainsail graphic frontend, write the graphical macros definition, and thermal...
> @Escrich Which Prusa printer are you using? This repository is for the MK2.5/S and MK3/S/+ 8-bit printers with PrusaLink running on a SBC or other Linux device. > >...
--- On MK3S you can set in LCD menu Settings -> HBed on load to [No] and load and unload will not heat up the bed. Hope that helps. Thanks...
Still no way to change remotely filament, no way for load or unload it from the web interface
> > Still no way to change remotely filament, no way for load or unload it from the web interface > > I wonder why you need it, since you...
Dear @3d-gussner , as stated above my firmware version is 3.14.1-8237, and no, I don't have a MMU on that machine, in the beginning of the times, long time ago,...