DaStivi

hi, yes sorry thought all 3d mouses have them... there are many many buttons! basically i see in the config file the button mapping... but is there any debug output...

ok, i see the button numbers... but i'm not able to add them to the config file? i've tried to add for example follwing to lines: "7": { "value": 1,...

its working... UPS needs to be connected to SKR Board... setup up in firmware... but also you need to enable "normal powerloss recovery" in TFT config.ini and also set the...

Thx for your answer, didn't even thought about that there could be ah difference as superslicer is ah fork from prusa slicer.. So what could be so much different then...

ok... that explains it 🤦‍♂️ thats also what you get with opensource i guess 🙈🙊 so at least thank for the clearification and i just gonna wait for a release...

is this really still true that you have to choose the spool manually before each print?? make the whole "zero-touch" print start right away kinda pointless, that octoprint should give...

i've got an Xiaomi Pad5, with 1.7.2 i've only like 5mm of the contac list visible... not even seeing half of the profile pictures... with 1.7.1 i'll see the contact...

hey there, i've the same issue. Invoke-DocGraph : Der Remoteserver hat einen Fehler zurückgegeben: (404) Nicht gefunden. In C:\Program Files\WindowsPowerShell\Modules\M365Documentation\3.3.0\Internal\Collector\AzureAD\Get-AADPolicy.ps1:140 Zeichen:34 i checked the graphAPI, at least the /identity/continuousAccessEvaluation is...

@emklap sure you can build your own firmware for the b1 tft... look at my other post an linking to the btt tft github... its in there allready... i can...

 This is the farest back "line" it's testing...