DL4OCH

Sometimes, processed pictures from Meteor are top down. mlrpt provides an -i option, to invert the pass. Is is possible, as for NOAA, to implement this into the meteor.sh bash...

On 29.01.19 15:03, OK1SLM wrote: > > How to enlarge pictures at Meteor-M2 is it somewhere in mlrptrc? > > — > You are receiving this because you authored the...

Ahoj Libor, are you sure, that you have 49ppm Offset of your SDR ? Please double-check with a local radio-station, as they are quite accurate. My good old Terratec SDR...

Your setup will not work. Even a RPi 3B+ will not work with mlrp, as the computing power is far too low. If your going to decode in 3 steps:...

Jonathan, please find below a sample from APRS.fi. I was transmitting in TG9 of Brandmeister. 2017-11-10 20:37:55 CET: DL4OCH>APZDMR,DB0EIG*,TCPIP*,qAU,T2KOBLENZ:!5136.63N/01013.01E/000/000 DMRplus via DB0EIG 2017-11-10 20:37:55 CET: DL4OCH>APBM1D,DB0EIG,DMR*,qAR,DB0EIG:=5136.63N/01013.01E[Wilm I've double-checked my settings....

'# DMR+ [DMR Network 1] Enabled=1 Name=DP Address=c4fm.ysfreflector.de Port=55555 '# Local=3352 TGRewrite=2,99,2,9,1 '#Reflector control command slot 2 94000->4000 to 95000->5000 PCRewrite=2,94000,2,4000,1001 Password=passw0rd Location=0 Debug=0 '# BrandMeister [DMR Network 2] Enabled=1...

From my personal experience, I've found, that a value around 750 is best. this enables my repeater to decode down to S3. Having levels around 1200, which gives the first...