DMRGateway
DMRGateway copied to clipboard
g4klx
In Voice GPS is sent to all networks at the same time
Maybe a feature, maybe not.
When I transmit locally in TG9, which is BM, inVoiceGPS is sent to XLX and DMR+ as well. Any chance to restrict GPS-data to the network the TG belongs to?
GPS data is only sent to the networking that is currently active for your TG. I don't understand how it can go to other networks. The DMR Gateway does no interpretation of embedded or explicit (as a data transmission) GPS data.
Jonathan,
please find below a sample from APRS.fi. I was transmitting in TG9 of Brandmeister.
2017-11-10 20:37:55 CET: DL4OCH>APZDMR,DB0EIG*,TCPIP*,qAU,T2KOBLENZ:!5136.63N/01013.01E/000/000 DMRplus via DB0EIG
2017-11-10 20:37:55 CET: DL4OCH>APBM1D,DB0EIG,DMR*,qAR,DB0EIG:=5136.63N/01013.01E[Wilm
I've double-checked my settings. DMR+ TG9 is mapped to TG99 on TS2, BM TG9 also TS2
If you have bad rewrite rules for the gateway then this could happen, but if that is not the case then it will not happen.
Sent from my iPhone
On 12 Nov 2017, at 16:35, DL4OCH [email protected] wrote:
Jonathan,
please find below a sample from APRS.fi. I was transmitting in TG9 of Brandmeister.
2017-11-10 20:37:55 CET: DL4OCH>APZDMR,DB0EIG*,TCPIP*,qAU,T2KOBLENZ:!5136.63N/01013.01E/000/000 DMRplus via DB0EIG
2017-11-10 20:37:55 CET: DL4OCH>APBM1D,DB0EIG,DMR*,qAR,DB0EIG:=5136.63N/01013.01E[Wilm
I've double-checked my settings. DMR+ TG9 is mapped to TG99 on TS2, BM TG9 also TS2
— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.
'# DMR+ [DMR Network 1] Enabled=1 Name=DP Address=c4fm.ysfreflector.de Port=55555 '# Local=3352 TGRewrite=2,99,2,9,1 '#Reflector control command slot 2 94000->4000 to 95000->5000 PCRewrite=2,94000,2,4000,1001 Password=passw0rd Location=0 Debug=0
'# BrandMeister [DMR Network 2] Enabled=1 Name=BM Address=master1.bm262.de Port=62031 '# Local=3352 '# Local cluster PassAllPC=1 PassAllPC=2 PassAllTG=1 PassAllTG=2 Password=passw0rd Location=1 Debug=0
There is only 1 mapping. TG99 RF to TG 9 Net for DMR+. It happens, when I transmit in BM
(tick marks added to override formatting in Github)
I have changed the behaviour of the routing of the embedded GPS and talker alias data, it should now only be sent to the active network. I think this is what you were expecting.