Bob Bolch
Bob Bolch
IBM z/VM CMS says: bad in1 = // in2 = // out = / outval/ good in1 = /inval1/ in2 = /inval2/ out = / outval/
I am comparing any differences between these libraries.
UTS was added from this download.
I have too many questions about UTS, including the licensing, so I am leaving this out of 1.1.2, to be revisited for a later release.
SIGNAL ON FAILURE was added to REXX in VM/SP Release 6, after REXX had been available on VM for about 5 years. It was never implemented in BREXX. This feature...
It looks like SIGNAL ON ERROR doesn't work correctly either. It is not being signaled when a CMS command gets a non-zero RC. ======================== /* */ ADDRESS '' SIGNAL ON...
Down load a test fix from https://www.dropbox.com/s/xrbt2nlcv2958aj/brexxfix.aws?dl=0 This is an aws tape made with a TAPE DUMP BREXX TEXT command. Retrieve the test aws file, and use TAPE LOAD to...
Hi Drew, I reproduced these same symptoms on my emulator (Bluezone Mainframe Display from Rocker Software). I had only used Mod2, 4, and 5 setups in the past, but never...
I will post a draft document here for review on the VMCE specific procedures to build and maintain the CP, CMS, and RSCS components of VM/370.
The manuals at http://www.bitsavers.org/pdf/ibm/370/VM_370/ can provide you with some backgound. MAINT MEMO for CP step 2 says to skip running VMFMAC DMKLCL DMKLCL if you have no changes to apply...