Arakon
Arakon
### Is your feature request related to a problem? Please describe Especially the camera uses up a good third of the available space even on a 2k screen. But also...
### What is the model number of the device you're trying to control?  ### What firmware version(s) have you tried? Lastest as of today. ### Which ESP8266 board are...
I got a really cheap Yi camera clone off aliexpress. It contains an Anyka AK3918 chipset, the serial number is just numbers, and the sticker calls it "Y20-1080P". The firmware...
### What happened?  In the bottom half of the spider web, two straight lines are generated that should not be there.  They're apparently created as plain perimeter lines....
Not entirely sure if this is actually related to the Plugin itself. When running a timed timelapse while printing, the timelapse starts automatically when the print starts, but will not...
Hi. I'm running a Pi 3A+ and a Mars Pro. I switched from Mariner on a Zero to OctoPi just today. For printing, it seems to work great. However, when...
### Description of the bug When auto-generating organic supports, several 90° overhangs are completely ignored. Using standard supports, they get supported. Also, the support base is just 2 walls on...
**Is your feature request related to a problem? Please describe.** When wanting to print multiples of an object, it's quite annoying to have to right-click the object, select clone, select...
### Is your feature request related to a problem? Please describe The on/off switch only allows to power i.e. the printer on or off. If one was to use a...
Due to the Klipper change from ACCEL_TO_DECEL to minimum_cruise_ratio, the TEST_SPEED macro fails halfways through with error `Error on 'SET_VELOCITY_LIMIT VELOCITY=600.0 ACCEL=16000.0 ACCEL_TO_DECEL=': unable to parse `.