f-zero
f-zero copied to clipboard
zruncho3d
F-Zero: by Zruncho - an evolved Voron Zero
It is a bit related to #5 , because I (and several others in Discord) thought it was the skirts that needed modifying. https://discord.com/channels/825469421346226226/841961639351812107/974575536762421248  So, we... uh, modified (drilled...
The Meanwell 150W PSU that is supplied in the LDO V0.1 (and V0.2 I think?) kits is larger than the CAD's version of the 100W. Hole to screw down the...
 https://discord.com/channels/825469421346226226/841961639351812107/974617830509125652
 reported by: eduncan on Discord
The top lip interferes with the corner clip by 4.1mm **FIX**: - In Panel move the history just before the mirror feature introduced in issue#8 fix (missing inserts in panel)....
The extrude feature is suppressed in the history....??? **FIX**: un-suppress the extrude feature for the "Extender" object and change its depth to -4.2mm. Also a 0.4mm chamfer would be advised.
 The hole is obviously at the wrong position. **Fix**: RearCornerTop::Sketch13 dimension[d274] should rather be 11.5mm from rear face, not 7.5mm from panel mount. 
Panel lower lip is superfluous and interferes with 1515 rail, see image  Fix: remove it from sketch2. SidePanels have no lip either and relocating it would require supports...
The "Panel" lacks the holes for the brass inserts on one side. The holes are also too big! Fix: - change Model Parameter:Panel:sketch1:Diameter Dimension-2 [d67] from 5.8 to 4.8mm -...
Added the AB drives with mgn9c cutaways as well as experimental flexure gantry attachment with captured nut used in F0.004
