Yatao Li
I guess.. just the normal stuff. 0.1mm tolerance
Oh and, they offer to embed 4 copper nuts in the body and I happily accepted :p
Yeah. The cylinders seems to be strong enough to hold them.
https://github.com/jmamma/MegaCommand_Design/commit/1339fe99583b68638f9dfa7dfdb793e1ff2d5c07 Emmm... I sent the old lid to them
@frnktrpz also check the bank selection pin (PIN43) You can enable the debug information in the test firmware, around line 57: https://github.com/jmamma/MegaCommand_Design/blob/3d7930fea5477b9c5ef57f928413bf8be208d8a9/TestFirmwares/megacommand_sram_test/megacommand_sram_test.ino#L57-L60 Uncomment these, and see if bank1 reading is...
Ah, yes. But I still recommend printing out the values -- if we get the same wrong value from both banks it means something (I'm not sure what it is...
The test FW doesn't compare bank1 read with bank0 read -- it compares both with the source random number, and when bank0 check fails, it doesn't report what's happening on...
I've got `SN74HC573N`
I didn't know the difference between HC and AHC. But I'm sure the LS series won't work here due to clocking limits. :)
I did have it working under Arch/GNOME42/Wayland. Not sure what's going on here. Is the blank window picking up colorscheme?