willumpie82
willumpie82
Did anyone look into the feasibillity of so called 'frameless' motors? as I read before, there is little torque required so mounting on 3d printed parts is feasible. Some challanges,...
did you consider using a piece of brass tube and just solder that to upper and lower boards (perferable with dualsided exposed copper on the boards for rigidity)?
simple proof of concept with a 5mm brass tube, I'll try to create a version of the boards to have a coper area to solder the shaft on, a bit...
Hi, @evanjmg, did you manage to port this project to run the led matrix natively connected to the pi?
It works (Y) on my rpiZeroW I do have one challange and that is the rotation of my individual panales are rotated 90degr each. I have CJMCU-8*8 panels from Ali,...
Thanx for the hints, I came up with a formula to calculate (verified in Excel), need to be extended to be more configurable, and input and outputs protected for invalid...
I think that ESPhome integration might get tricky, when making a simple blank ESPhome project the footprint is already ~40% of the memory. if we start adding custom integrations will...
something like this? https://hackaday.io/project/18899-rt-soldering-pen