whywouldi
whywouldi
So......I have replicated this on another brewpiless setup using 4.1. I have completed the following fault finding checking at each stage for correct operation: Changed all temp transmitter a number...
Managed to sort it. Noticed that the temperature reading were indeed dropping out randomly. This was causing the heating circuit to suspend/reset as it was not sure what the temperature...
I am using DS18B20’s with the 4k7 ohms resistor connected between the 3v3 & the signal cable. I had a system thats been operation for a year so am happy...
Sorry for the delay in reporting back. So the relay is operating correctly. I’ve connected it to D0 as per documentation for D1 mini (only three possible connections D7 I...
Ok thank you. I’ve now purchase a ESPwroom32 so will give that a go 👍🏻. Appreciate your help.
Thank you so much for the response. I spent most of last night attempting to get the Pressure relayed to brewfather without success. I followed the steps you gave but...
ah I see......
Thank you for helping with the issue. I will await the app update 👍
Thank you Scales82 for the response. In my previous comment I had already tried this method including the "pressure_unit": "PSI" but with no luck. After your post I have just...
So......... just posted my last message and had another look at brewfather. The graph is now showing a pressure reading for both the %p and the "10" readings I sent...