wheelie96

Thank you for your comment. Now, I have another questions about the waypoint mission. Waypoint missions generate all waypoints in advance and run the mission after they are uploaded. At...

Thank you for your comment. I understood that instead of connecting the RTK module directly to the flight controller, I need to connect it to the module via the onboard...

Excuse me for your comment after a long time. About "it is not feasible to directly use the waypoint function", is there a possibility that it can be used indirectly...

Thank you for your quick comment. So, about "OSDK attitude control", where is that program like .cpp or .h? Is OSDK-ROS 3.8 include it? And, about "It may not be...

Thank you for your comment. But I have already known that the program draws the polygon and can change the number of sides and the length of sides. So I...

Thank you for your comment. Leaving my question aside, Are you not the creator of this ”demo_mission.cpp" program? If you are not, I want a comment from the creator.

Thank you for your comment. Yesterday, I took the drone outdoors and tried the outdoor roslaunch again. At this time, I first tried roslaunch as it was carried out, but...

Thank you for your quick reply. You said "directly use the Linux demo to verify", does that mean I start the program directly to get gps_position without starting ROS? And...

Thank you for your quick reply. At the beginning, I tried roslaunch after change the baud rate at the indoor environment earlier, but I cannot roslaunch. I changed the baud...

Thank you for your comment. Now, because it is snowy at outdoor, I cannot takeoff M600pro. Can I do troubleshooting without M600pro takeoff? And, because I have no time, so...