Maciej Kobus

This is fully intentional. The same principle made some older IPL modchips work: ViperGC, QoobSX/Pro, HyperBoot. They all overpowered RTC-DOL chip to avoid lifting MISO pin. I've never heard about...

Keep it at reasonable 10-15cm length, 28 AWG for data and 26 AWG for 3.3V and GND and you should be good.

Thanks for a very detailed explanation. I was contacted by another person who has very similar issue - they get succesfull PicoBoot boot only if they use analog output. For...

I've updated the Troubleshooting guide and linked this issue so people can get more information here.

Swiss is compatible with exFAT: https://www.gc-forever.com/wiki/index.php?title=Swiss#Supported_Devices I don't think PicoBoot repository is a good place to report issues with Swiss running on Wii. I consider initial question as answered.

Don't be too hysterical over stuff :) Really cheap Chinese power supplies for sure have bigger chance of failing and possibly destroying your device. In reality you don't hear very...

In my opinion GameCubes are starting to show their age and they are now prone to all kind of different power issues caused by failing capacitors. I had very similar...

Everything seems to be correct according to what you wrote. Black screen would indicate hardware issue and that can be only validated with installation pics.

Thanks @luciolles. Glad it works for you now. These kind of issues are almost always caused by wires being too long which causes interference. I'm still looking into a way...

@ThexXTURBOXx It also greatly depends on the quality of the wires used. 10cm is perfectly enough for the install and this is what I recommend now. @luciolles This location is...