Yancey Wang

In the photo at homepage, I was originally using tape. But tape is not very reliable. As in 2024 I would suggest you to get some `electric test hooks` (try...

> 当UDPspeeder的fec冗余都恢复不了包时，怎么办，就确实丢了吧，还是会有nack或者arq来确保重传得到包呢？ 没有nack/arq，只有fec。 如果需要nack/arq ，在上层做。udpspeeder设计上不负责做这个。

> 撇开kcptun只能代理tcp这个差别。 > UDPspeeder和kcptun的fec功能差别在哪呢？ 没法强行撇开 kcptun只能转发tcp UDPspeeder是转发udp的 应用场景就不同 > UDPspeeder的fec功能会更好吗？ 如果一定要这么问： 1. udpspeeder可以上下行fec参数不一样 2. 可以不重启的情况下改变fec参数 3. 有mode 1 mode2, timeout， fine-grained fec参数。 可调参数多得多 4. 用户态udp分片 5. 对抗突发丢包的机制 6. 用kcptun你的拥塞控制被绑定在了kcp，没有换的可能；用udpspeeder可以自由选择上层的拥塞控制。配合vpn，你可以用cubic，bbr； 配合hysteria可以用quic

First, FakeSSL and FakeHTTP wont be enough. For different circumstances, you may also need FakeFTP,FakeMail,FakeWeChat-Video-Sreaming, etc. If you want to make it close to perfect, the supported protocols will grow...

maybe see https://github.com/wangyu-/tinyfecVPN/issues/99

you are confused by the multiple meanings of MTU. "min mtu required by ipv6" is 1280 means ipv6 need to support at lease 1280. Sending a packet of 500 is,...

i think you might need to manually tune down the 2097152 to a workable value. On linux this is not a problem, since linux allow you to set a over-sized...

Hi, the parameters in [Suggested-parameters](https://github.com/wangyu-/UDPspeeder/wiki/Suggested-parameters) are just simple example parameters for new users to get started. I don't provide fine-tuned parameters for very specific use case. If you want to...