BrewPiLess
BrewPiLess copied to clipboard
vitotai
Use an ESP8266 to replace RPI and Arduino. Running BrewPi without Pi, therefore, BrewPi-Less
Hi Vito, What I would like to do is to customize and use a different display like a colour 2.8 Inch 240x320 2.8" TFT LCD Touch Screen Module ILI9341 240*320...
BrewPiLess.v4.2a4.4m2m.bin BrewPiLess.v4.2a4.oled.newui.4m2m.bin There are two types of firmware. The same motherboard. The LCD version is normal but the display lacks characters after a few hours). The OLED version keeps restarting....
Would it be possible to add Humidity control to the project as well? Could be done using something like a DHT22 sensor and using 2 more pins to control another...
When trying to capping after reaching a certain gravity of fermenting wort, this option turned out to be not working. That is, the CONTROL page - the CAPPING CONTROL-GRAVITY tab...
I've had a number of brewpiless setups using ESP8266 chips and on all of them I find after being on for a few days the display output starts to corrupt....
Hi, Im seeing some strange temp probe tracking at higher temps (around 35dec C) As seen in the graph, the fridge temp all of a sudden begins to follow roughly...
I bought a 5V pressure sensor from [Banggood](https://banggood.app.link/jRLoWoLri4) that max on 30PSI. Read to late tough that I also should use a ADS1115 breakout. Is there something else I need,...
This commit fixed PTC control page. At this moment "Glycol Temperature Control" is not shown.
After logging for about a day or more, I get the "Log version mismatched!" error and need to stop and restart logging to be able to see the graph again....
