BrewPiLess

BrewPiLess copied to clipboard

[Feature Request] Upload a Beer Profile

1

Hi, Is it possible to upload and apply a Beer Profile remotely? Does the current version have this feature? Something like an HTTP Post for a JSON beer profile? or...

pjpeartree

Lost the iSpindel reading and data

1

  I have lost an iSpindel Column on the main screen, it is updating data because I can see the AUX temp updating with correct value. What is wrong?...

terragady

Has anyone used Floaty Hydrometer as a temp and gravity sensor with brewpiless?

cobotkarl

Hi, Thank's for the work. Each PID needs to be configured and setting up Kp, Ki and Kd manualy is not easy. Because each room, Fridge, heater and fermenter are...

alexthecoolman

Beer profile step limitation

9

I've tried searching for any documentation to support the limitation i'm expeeriencing in the number of steps I can use in a beer profile. 4 steps is the lilmitation I...

prylnissen

Good day, Recently I started using BrewPiLess and I faced following problems with device: - after remote log setup for ubidots is completed and BrewPiLess is sending data to Ubidots...

sikret1337

MQTT Remote Control

24

Hello, Great project!! I cannot seem to get MQTT Remote Control to work. I'm able to get it to attach to my MQTT broker and see the logging in topics...

jbishop129

Massive iSpindel temperature error

11

I just finished building an iSpindel and linking it up my brewpiless setup. The gravity reading seems to coming through fine but the temperature is off by almost 100F. The...

walldad

OTA failure

1

Hi, i´m getting a Update Failed:4 when trying to update to BrewPiLess.v4.1r4.esp32 via OTA. Works fine with BrewPiLess.v4.0r2.trial.esp32. Any suggestions how to resolve this?

kanutten

Can't get ispindel to work as beer temp sensor.

4

It seems as I can't get the ispindel to work as the beer sensor for temperature. I am getting the values as aux temp ok, also tilt and battery shows...

tblok