visualapproach

@pdecat In the meantime I think you should run the `test-hardware\4-wire-serial-bypass` program also. It just copy the data between the CIO anad DSP. No modification at all except for a...

Log feature in dev branch. Edit config.h and set DEBUGSERIAL = true; In browser - open console and see if the debugging data is showing. If so you can let...

> Hey! me again, as I said before, thanks for the firmware, it is fantastic to use the spa with home assistant! specially with the scheduler component. I have some...

Blocking the buttons is already implemented by changing the array of enabled buttons. Making the web ui local is possible but not implemented

> > Blocking the buttons is already implemented by changing the array of enabled buttons. Making the web ui local is possible but not implemented > > I see it...

> > > > Blocking the buttons is already implemented by changing the array of enabled buttons. Making the web ui local is possible but not implemented > > >...

Thanks, Yes in a small interval the curve is linear, but compare the slope around 35 with the slope around 25 and it's different. It's not impossible to do what...

Hi there! Can't help you with your nationality, but NO54123 is not an option in the 6-wire version. You need to choose PRE2021 :)

Wow, how many variations do they do?! Good pics, but hard to tell. Those four wires could be data lines since they have RC filters. In that case Vcc and...

Judging from your picture, the pump side appears to have no brain, so it's a completely different architecture. I think the display contains the motherboard that controls all the relays...