visualapproach
visualapproach
Your welcome! Happy it worked out
May be brown out resets (low power). What's the reboot cause? Look at the config page at the bottom. 4-wire systems seem to have weaker power supply to the ESP....
okay, strange. I'll let a device run here for a while and see if I can replicate. No pump to connect to though.
Mine has been running now for 22h without a hickup, but as I said, without a pump connected to it. You could try erasing the flash completely and recompile, upload,...
Thanks @chunkysteveo for chiming in. Good suggestion. Unstable communication between ESP and the pump usually summons an E13. Some people seem to have that problem with their 4-wire pumps. @pdecat...
I'll see if I can do something
A real E02 is only triggered when the pump is on. I suggest this test to find out what's causing it: Either "take control" and leave the filter pump OFF...
> The E02 error meaning water flow is not detected through the pump, I don't believe it would ever trigger if pump is off. Exactly! So if you get it...
I don't mistrust you at all and it would be one heck of a coincidence, but it's best to be methodical and narrow down the possible cause as much as...
I've been thinking about logging too. Need some free time first to work on it. I'll let you know here when I've looked at it