vanepp

## Current Behaviour Attempting to edit a dual row header with parts editor causes an error.  fortunately it isn't deadly as clicking OK to the error message correctly loads...

fc-51 parts in core parts have a problem in pcb.

9

The two fc-51 parts (simulation off and simulation on) have pcb pins reversed. See forum post https://forum.fritzing.org/t/parts-are-mirrored-in-pcb/27736 Here are two parts that correct the problem, but I expect there is...

First and formost thank you for svgpathtools. It is the only python package I have found that will create a viewbox that matches that produced by Inkscape. That said this...

Doing send to back on pcb changes silkscreen contrast and won't recover

1

## Current Behaviour example sketch (any sketch should do!) [MP3_ESP32_done-no-ground-fill.fzz.zip](https://github.com/user-attachments/files/20777674/MP3_ESP32_done-no-ground-fill.fzz.zip) Load it in to Fritzing and switch to pcb view.  initial layout (correct!) Now move pcb to back by...

Bad part and poor outline.svg fail spectacularly

2

## Current Behaviour First the various files: The original (broken) sketch (remove the trailing .zip to get the .fzz file) [reloj_meru.fzz.zip](https://github.com/user-attachments/files/20025715/reloj_meru.fzz.zip) then the corrected sketch where the corrected version of...