vanepp

A new part for the Pololu VNH5019 motor driver

Fritzing 1.0.0 and later don't render old sketches correctly.

4

## Current Behaviour This sketch someone uploaded with parts from ~2016 no longer renders correctly in schematic in Fritzing 1.0.0 and later. [Schematic Diagram2.fzz.zip](https://github.com/fritzing/fritzing-app/files/14661546/Schematic.Diagram2.fzz.zip) (remove the trailing .zip to get...

obsoleteing doesn't correctly update the label field

1

## Current Behaviour Load a sketch with an obsoleted part (Dual_VNH2SP30_Motor_Driver in this case)  say yes to the update  Load the updated part from core parts. Its label...

In schematic right clicking then moving a label causes a jump in position

9

## Current Behaviour If you place a part in schematic, then right click on the label and move it slightly (1 grid line in this case) the position jumps a...

Schematic subparts appear to have a number of issues

3

## Current Behaviour I made someone a new subpart part (detailed in this forum post https://forum.fritzing.org/t/stereo-potentiometer/4877/7 That turns up a number of cosmetic issues (they don't appear to affect operation!)...

## Current Behaviour Load part (after removing the trailing .zip) in to Fritzing [5V RELAY 2.0-fixed.fzpz.zip](https://github.com/fritzing/fritzing-app/files/14546909/5V.RELAY.2.0-fixed.fzpz.zip) schematic view of loaded part is correct  save the sketch as bug1.fzz.zip [bug1.fzz.zip](https://github.com/fritzing/fritzing-app/files/14546939/bug1.fzz.zip)...

Imported part not written to .fzz file

1

## Current Behaviour The part (from Adafruit) [Adafruit PermaProto Full-sized Board.fzpz.zip](https://github.com/fritzing/fritzing-app/files/14413239/Adafruit.PermaProto.Full-sized.Board.fzpz.zip) (remove the .zip to recreate the .fzpz file) and the broken .fzz file that was saved [testSketch.fzz.zip](https://github.com/fritzing/fritzing-app/files/14413343/testSketch.fzz.zip) (again remove...

## Current Behaviour In this forum post https://forum.fritzing.org/t/hoperf-rfm95w-lora-module/10011 it turns out (after lots of back and forth) that a stroke-width in the pad even when stroke is none is added...

## Current Behaviour I have a new part that is mis aligned in pcb. The part is a proto board and thus has inhibit set in schematic and pcb which...

## Current Behaviour In this forum thread https://forum.fritzing.org/t/cant-get-svg-to-work/20580/ someone tried to import this svg in to Fritzing 1.0.1 using the parts editor  while the svg has a number of...