Valerio
Valerio
Hi! I wanted to start building this project, but i have a bit of confusion around PCBs. For what i've understood from hackaday project logs, i'll need one bottom PCB...
I've switched to the LQFP version of the STM32F072. Was there any reason why you went that route? It seems pretty unconvenient to solder. I've also: - Removed some conflicts...
No trace of Q10, Q11 on https://github.com/valerionew/unisolder-notes/blob/master/BOMs/Unisolder%20BOM%20TME%20Farnell.xlsx This is serious.
Hey everyone! I wanted to turn this into a chrome extension but i quicky realized that currently i have more skills at biasing transistors than at writing lines of code...
Sometimes the download fails due to erratic errors, especially when downloading a large number of vids from a list, it happens often that 2-3 videos are not downloaded. At the...
Hi, I'm using this library on a mkr 1010 to send some data every 5 seconds. I based my sketch on the WiFi Simple Sender example. After 1-2 hours the...
The poll() call is moved inside the non-blocking delay cycle, this fixes #14 Also, a reconnecting example is added
Hi, i've added the arduino mkr 1010 footprint. The measurements are taken from the official eagle sources _(ew)_ https://content.arduino.cc/assets/MKRWiFi1010-reference.zip Matching symbol: https://github.com/KiCad/kicad-symbols/pull/2290  --- All contributions to the kicad library...
Hey! i've tweaked a bit one of the MSOP-8 exposed pad variants to add compatibility for DIODES inc's own version, as requested here: https://github.com/KiCad/kicad-symbols/pull/2294 both versions: with and without thermal...
Same as #2423 but for DE119. Symbol PR: https://github.com/KiCad/kicad-symbols/pull/2936 The footprint is the same, the symbol changes by 1 pin DS: https://www.display-elektronik.de/filter/DE119-RS-20_635.pdf  --- All contributions to the kicad library...