upsert

There is almost no documentation on how to use the area registry: https://developers.home-assistant.io/docs/en/area_registry_index.html It seems like the feature is not fully implemented in Home Assistant.

I have pushed a change to update the `fan` component to use percentage instead of speeds provided as string. This is a potential breaking change depending on how you are...

Interesting. Maybe if it is not under Zones and has no Buttons, assume an occupancy sensor. Worse case I will have to do a `binary_sensor: [ 1, 2, 3]` type...

Sadly, I don't think I will be able to support the occupancy sensors as they do not output anything to telnet interface. I initially thought it was working, but it...

Yeah that makes sense. The last two posts are from people with the full RadioRA 2 Main Repeater and not RA2 Select. The RadioRA 2 Main Repeater has both a...

Firmware 06.05.14f000 is out and sadly it does not appear to change the telnet interface to have output events for occupancy sensors on RA2 Select. Maybe we can appeal to...

Firmware 06.07.07f000 is out. No changes found with respect to the telnet interface.

Firmware 06.08.04f000 is out. No changes for the telnet interface. Probably preparing for [Caseta fan controller](https://fcc.report/FCC-ID/JPZ0119) I spotted a couple of weeks ago.

Firmware 06.09.01f000 is out. No changes found with respect to the telnet interface.

Firmware 06.09.05f000 is out. No changes to occupancy sensors in RA2 Select. Likely the firmware required to bump Caseta up to 75 devices.