Tony Naggs (Twitter: @xa329)

@iceman1001 The intention is that it should autorecognise/install - but it needs testing with a Windows install that has not had the rfidler .inf installed previously - since Vista Windows...

@iceman1001 I created the pull request so that someone with a Win 8.x sysem can test. Even if I test further with Win 7 systems I can potentially access it...

Test Status: fails to install on a clean Win 7 system. Untested on Win 8.x. Fixes & suggestions welcome!

I have looked at one version of the Pinguino Bootloader source - https://github.com/PinguinoIDE/pinguino-bootloaders/blob/master/p32/usb/v1.x/main.c The Bootloader is based on an old version of Microchip's PIC16/ PIC18 /PIC24 Bootloader, so it could...

Thanks for the comments, this all sounds good for helping quality & reliability. I can't speak for Zac, but I guess some of the USB signal issues are inherited as...

I am able to view the schematic with the free version of Eagle 6.5.0 Light. :-) It would be helpful to be able to measure the received clock amplitude, perhaps...

I can have a little look next week, what is in your fork? If you have a working feature it will get more attention if there is a pull request....

Thanks for reporting this. I will look at the Windows driver installation and updating the instructions over the weekend.

I will investigate how to support Windows 8. The Alpha version of RFIDler just presented a virtual COM port over USB. I don't think Adam has changed this in the...

I think it is quite a common requirement for a USB virtual COM port device to want the default MS Windows (7, 8) usbser driver. However I cannot find instructions...