Jeff Jenner
Jeff Jenner
@sever-sever very cool, this is already a much better solution to the current WLB implementation. Two things relating to timing though: The timeout parameter might be better named "interval" to...
Seconding this as a really useful feature. Something that doesn't even edit the node or just very simple debug output would be nice just to see some common ways of...
Probably because GUI libraries are extremely hard. I'd point you towards shiny but that's also dead. Currently if you want a material UI you can use this project as a...
Using git clone command or github desktop app.
Thanks, you can find what you're after here: https://thetooth.name/tmp/ Ignore the FRMW commands in the kickcat dump, that's just wishful thinking on my part.
Yeah I've based my code on that example, here's the output, control word on the left and status on the right in those bin outputs. It looks to be correct...
@Rdk-T I think you're on to something, dump is here: https://thetooth.name/tmp/eeprom.bin If I startup CODESYS and set the drive to free run I get the exact same behaviour.
@leducp it should work now, forgot I was running everything as root to avoid setting caps. I have asked Delta about this issue and yet to get a response.
I'm up for anything at this point. Btw I am able to move the motor in profile velocity mode just fine, profile position mode is also broken and neither of...
Thanks, there are presently 5 slaves, EK1100 with two cards, followed by two drives. Is the address returned by `bus.slaves().at(a1Drive).address` correct for this? it seems to be setting outputs on...