telizynav
telizynav
How to fix this? https://aliexpress.ru/item/1005009155721872.html?spm=a2g2w.orderdetail.0.0.3f244aa688opB8&sku_id=12000048127877344
Thank you, I removed GPIO Button from the template. {"NAME":"Sonoff ZbBridge","GPIO":[320,3552,0,3584,5312,0,0,0,640,576,608,0,0,0],"FLAG":0,"BASE":75} Rule1 ON System#Boot do TCPStart 8888 endon I tried to do GPIO2 TCPtx, GPIO15 TCPrx, but the ZHA does...
This template was already in the device when I bought it. The seller does not answer, I can only guess
Gpio1 = ZBtx, gpio3 = ZBrx. TCPStart is working only with gpio's TCPtx/rx
If gpio1-3 = TCP - i can connect the device to ZHA, but ZB dont working. If gpio1-3 = ZB - vice versa
Then how to connect Tasmota Bridge to Home Assistant ?
Zigby works locally, devices are linked. My expectations are to control the Bridge from Home Assistant. Ideally - Zigbee2Mqtt.
Got it. Thanks. Which Tasmot template should I use to connect to Zigbee2MQTT ?
Console log: 09:23:15.211 UPL: File ncp-uart-nsw_6.7.9_115200.ota (192240 bytes) 09:23:15.332 UPP: Multicast (re)joined