Sebastian Muszynski
Sebastian Muszynski
The device is supported of the HA core by using the properties of the `philips.light.bulb` which isn't perfect. The PR improves the situation a bit but has still some gaps.
Fixes https://github.com/syssi/xiaomi_fan/issues/176
Known models: - yunmi.waterpuri.lx2 - yunmi.waterpuri.lx3 - yunmi.waterpuri.lx4 - yunmi.waterpurifier.v2 - yunmi.waterpurifier.v3 - yunmi.waterpurifier.v2 `get_prop []` retrieves all supported properties. The is a property decoder per model which needs to...
This PR introduces support for slightly changed frames because it the firmware supports/reserves space for more cells (24S vs. 32S) now. Most registers are shifted by 8*2 bytes (cell voltages)...
See https://github.com/syssi/esphome-jk-bms/discussions/106. The android apps aren't obfuscated. It should be possible to extract details about the protocol / frame structure and content.
#109 - [ ] Add a README / instructions - [x] Add sensors & binary_sensors - [x] Add number entities to change settings - [ ] Add warnings about cells,...
https://github.com/jblance/mpp-solar/issues/224#issuecomment-1123166015 > For 'investigative' purposes, on my display I'm presently showing 0.00 Amps, 13.1 Volts, error 9 and 0% SOC. Sorry I can't give you more meaningful data, the board...
The new android app comes with an emergency switch to override the protection settings of the BMS. For example if the low voltage protection kicks in and there is an...
| Reg | Len | Payload | Description | Test result | | ----- | ----- | ---------- | -------------- | ------------- | | 0d | 04 | 02000000 |...