stefi

does not do anything

5

enabled with marlin 2.0 latest bug fix, wired to an skr 1.3 board, servo pin 2_0 but on power loss it provides a few seconds of power to move the...

MINI UPS IS USELESS

7

i wired up the mini ups to one of the end stop max pin's on the skr 1.3 as shown but when there is power loss it ignores it and...

me again. i got past all that you said and now uses prompts ok but now says cannot conect to routing server, i am sure that this is just some...

Existing command 'BED_MESH_CALIBRATE' not found in gcode_macro rename

1

I get the error Existing command 'BED_MESH_CALIBRATE' not found in gcode_macro rename but no idea why [klippy.log](https://github.com/jlas1/Klicky-Probe/files/13194842/klippy.log) [klicky-variables cfg.txt](https://github.com/jlas1/Klicky-Probe/files/13194816/klicky-variables.cfg.txt) [printer cfg.txt](https://github.com/jlas1/Klicky-Probe/files/13194817/printer.cfg.txt)

sd module fails

6

So I managed to get everything working including the ir but the sd module fails, I tried the sd Card built into the ILI9341 2.8" screen that I used and...

`sd card not detected

3

tried a 128mb,4mb and 8mb, none are class 10, all i get on the screen is no card, is there a schematic for this section, also can not find what...

can th4e pwn be used with a laser on the K40?

I have never used AVRDUDE but have installed it, I built this board with ATMEGA88PA-AU and a 27.000mhz crystal, there is many diferent firmwares in the github file, I do...