sskaug
sskaug
I see that that sentence is not perfectly clear. What it refers to is the process of braking before reversing direction. 3D mode was designed for props that need to...
Thank you for the very good and detailed bug report! We did a fix for music in 32.8.2. For the very fast 148MHz MCUs, some notes became longer than the...
First of all, this mode of operation is demanding. What most likely happens in your case, is that there is feedback from motor currents to the bemf sensing comparator. So...
Now posted here: https://github.com/bitdump/BLHeli/tree/master/BLHeli_32%20ARM/Loaded%20startup%20testcode
Yes, we have seen this before. The emphasis on low rpm robustness was too high for proper operation at higher rpms. I have replaced the Rev32.8.9 testcode with a Rev32.9.9...
Great that it now works! The change was to the filtering of the bemf signal. There are surprisingly few installs of this code, so at the moment we can not...
Sure, HW codes are now added
A half pwm testcode is already posted (as 32.8.2 that has almost all the mods of 32.8.3): https://github.com/bitdump/BLHeli/tree/master/BLHeli_32%20ARM/Half%20pwm%20low%20frequency%20testcode
I would not think so. These items is all that is changed from .2 to .3: -Improved rampup consistency. This can help make e.g. flip stops more precise. -Fixed a...
Thank you for reporting. This will need to be further investigated. There is no mechanism in firmware that deactivates the ESC until cycling power.