sskaug
sskaug
We are not aware of any firmware issue relating to this, so yes, I would recommend to contact the vendor about the issues.
You can email to blheli32 at gmail dot com
You can email to blheli32 at gmail dot com
You can only load xilo_4in1_v2 code to your ESC. And for the type of MCU used in this product, earlier code revs than 32.8 are not available. Your issue may...
These codes are now added: https://github.com/bitdump/BLHeli/tree/master/BLHeli_32%20ARM/Older%20revs%20testcode
Thank you for sharing the data. I assume this motor is the common 12N14P configuration. In which case 31000 in the above graph is about mechanical 121RPS and 848 electrical...
The erpm period is updated for every electrical revolution, if the previous period was shorter than 1024us. If the previous period was longer than 1024us, then period data is updated...
At the moment we have no plans for this. This is not in line with the primary application area for BLHeli (which is multirotors) and also memory is starting to...
Thanks for the good description. First of all, when an ESC goes unresponsive (with input signal and power present), that is something we have occasionally observed with some ESC designs....
Now added 32.9.1 testcode here: https://github.com/bitdump/BLHeli/tree/master/BLHeli_32%20ARM/Misc%20testcodes Also added the 32.8.3 code for completeness.