srsRAN_4G

srsRAN_4G copied to clipboard

different MCC MNC on configures and slice not support

3

Hello, i am on the construction of private 5g network. ## Setup Details ## [Specify details of the test setup. This would help us reproduce the problem reliably] e.g. Network...

hyunseoha

probably mispelled property in pcap

2

In the pcap section, the documentation talks about the `mac_enable` property. This property is not in the actual properties of the `[pcap]` section. I thought it would be more probable...

tiamilani

E: Unable to locate package srsepc

3

## Issue Description ## [Describe the issue in detail] I can't install srsEPC ## Setup Details ## [Specify details of the test setup. This would help us reproduce the problem...

chatofking

## Issue Hello everyone who reads this question! On version srsRAN 21_04, I successfully made more than 4 calls. When switching to version 22_04_1, the 5th call does not reach...

egortaran

Correct f_low_mhz based on 36.104 spec.

1

B22 fd_low_mhz should be 3510

joshuazhu78

Add additional PLMNs to sib.conf

2

This change will allow configuring serveral PLMNs (MOCN) Thanks a lot!

matan1008

5GSA ping 10.10.45.2 failed and srsenb disconnected after ping

2

## Issue Description ## srsenb and srsue can be successfully built,but there is a ping problem when I use directions "sudo ip netns exec ue1 ping 10.45.0.1" and "ping 10.45.0.2"...

troiszhang

## Issue Description ## Is that normal logs that you can see while running the enb process and continuously function the UE's ## Setup Details ## We're running an Commercial...

neilrep

ALL UE's Cannot reconnect automatically to the network after disconnected

1

## Issue Description ## 2022-08-03T06:36:47.155345 [MAC ] [W] [ 5449] Maximum number of connected UEs 64 connected to the eNB. Ignoring PRACH ## Setup Details ## We're running an Commercial...

neilrep

UE suddenly disconnected to the network with VoLTE icon

2

## Issue Description ## 2022-08-03T07:17:38.645033 [RRC ] [E] Failed to push radio link UL state ## Setup Details ## We're running an Commercial EPC--> enodeB --> SDR (b210) --> duplexer...

neilrep