srsRAN_4G

srsRAN_4G copied to clipboard

5G SA: Assertion failed in `./lib/src/rlc/rlc_am_nr.cc:1825`

43

## Issue Description ## Assertion failed in `./lib/src/rlc/rlc_am_nr.cc:1825`. ## Setup Details ## 5G SA connection between two USRP B210's (with a 30 dB attenuation on the line). ## Expected Behavior...

TallGuy74

srsue synchronization issues with SA Amarisoft Callbox

5

## Issue Description ## I have been trying to make a 5G SA connection between srsue and the amarisoft callbox following the tutorial on the wiki page. Im using an...

kbaccar

5G SA UE 5 MHz Bandwidth?

2

## Issue Description ## The appnote specifies that the 5G SA UE is limited to 10 MHz. Is it only able to support 10 MHz, or can it also support...

Clay-Uhing-APL

5G SA COTS UE Disconnecting after a few minutes "Removed user rnti=0x4601"

6

## Issue Description ## Following the 5G SA COTS UE [Application Note](https://docs.srsran.com/en/latest/app_notes/source/5g_sa_COTS/source/index.html), after running srsENB with sudo ./srsenb enb.conf the UE successfully connects to the open5gs net and gets an...

cristina-posada

## Issue Description ## I've recently discovered that srsRAN has something called RF plugins that allow you to switch between RF implementations (UHD, ZMQ, file-based) from the configuration file. I'm...

j0lama

## Issue Description ## I started reading the `liblte_mme.h` file and I noticed that in `LIBLTE_MME_ADDITIONAL_INFORMATION_STRUCT` the `info` length is configured to 51024 and the `N_octets` is `uint32`. I might...

matan1008

srsUE can't attach commercial network with LimeSDR-USB

2

## Issue Description ## I'm trying to connect LimeSDR-USB with srsUE on a linux PC to a real commercial LTE network, using a pcsc card reader to read a real...

PYH2017

Error buffer pool empty in setting the eNodeB

1

## Issue Description ## My eNodeB shows an error of Buffer Pool empty upon starting the eNodeB ## Setup Details ## I am running srsRAN on two laptops connected to...

ssonkokevin

## Issue Description \ ## Setup Details ## [Specify details of the test setup. This would help us reproduce the problem reliably] e.g. Network configuration, Operation System, Hardware, RF front-end,...

ssonkokevin

## Issue Description ## srsenb gives TX Sample rate warning  how can I increase sample rate. I checked config files but couldnt find it. ## Setup Details ## [Specify...

beruysaliz