Greg G.

Non-root container and APACHE_DISABLE_REWRITE_IP cause "Could not remove /etc/apache2/conf-enabled/remoteip.conf: Permission denied"

5

I've been trying to get this image working and I've run into a snag. I want to use my own account internally so that the files created by the docker...

Glances process staying asleep instead of reporting

11

I have glances installed on six machines in my house (two orange pis, a raspberry pi, a small ITX board, a NUC, and a server). It works great on all...

Glances integration loses connection and doesn't automatically recover

7

### The problem I have glances on a few machines in my house. There are one or two of them exhibiting this problem where the integration just (seemingly randomly) stops...

Selection of console using mouse click-hold-drag doesn't work

1

### Fluidd Version 1.23.0-f67487f ### Browser Chrome, Edge ### Device Desktop PC ### Operating System Windows ### What happened When I try to select a bunch of console text using...

### What happened? After painting an object and slicing it, it seems that the paint volume does not make it very deeply into the model. In this animated gif example...

VOC sensor using incorrect device_class - reported in HA logs

2

I have noticed in the Home Assistant system logs that my blueair VOC sensor shows up because the units are ppb instead of µg/m³. The log entries look like this:...

HA version 2023.5.0 yields: AttributeError: 'ConfigEntries' object has no attribute 'async_setup_platforms'

1

Looks like this integration ran into the dreaded: > Detected integration that called async_setup_platforms instead of awaiting async_forward_entry_setups; this will fail in version 2023.3. Please report issue to the custom...

**Describe the problem you have/What new integration you would like** I'd like to build a lap timer with ESPHome to measure the broadcast of 5.8GHz signals from drones. There are...

WebRTC/RTSP camera support (crowsnest)

9

I've recently learned about crowsnest (https://github.com/mainsail-crew/crowsnest) which supports alternative methods for serving up the cameras attached to a printer. It allows for webrtc cameras via `camera-streamer`. After upgrading my printer...