Rocky
Rocky
> > > > How do you controlled it with the raspberry pi > > You have to connect ground and two GPIO pins from RPi to the relay. I...
> > > > > that doesnt work, the pin from the RPI have not enugh power to hold the on signal > > > > > > It works...
you mean this? https://github.com/softwarecrash/DALY-BMS-to-MQTT you can integrate your bms over mqtt. else you need for every bms a special USB cable with a max232 inside, and when someting goes wrong...
> Hi Rocky, almost yes! I would have nearly the same but without the RS232 connection and the ESP. My suggestion is that i can use the present BT Bluetooth-Modules...
> Hi Rocky, Hello Rocky, Yes, I know the protocol problem. My hope was that because almost all YouTube channels work with the DalyBms, there might be a Bluetooth solution....
+1 and the roborock app allows the remote camera view
@Zefau danke für die schnelle antwort, eben auf alpha 47 aktualisiert, jarvis startet ohne murren, aber sobald ich ihn über port 8400 aufrufe stürzt der adapter ab und ich bekomm...
Das sieht auf jeden fall viel besser aus, nach einem initialen laden ist der refresh deutlich schneller, zumindest in chrome  in firefox ist es schneller geworden, aber haut einem...
eigentlich da wo einen das kleine i hinbringt (hinter dem platz für den icon namen) dort dan google material design ausgewählt ggf den link austauschen oder mehr infos dahin? den...
Merk schon, irgendwas habe ich da nicht mit kopiert, aber auch die anderen gingen nicht die da gelistet sind. Mit denen aus deinem jetzigen Link funktioniert es auf Anhieb. Gibt...