Rocky

just checked the code, the gen_total datapoint is a uint32_t datatype, the u means unsigned, so they never can have a negative value. i think the fault comes from the...

badly there is no raw data. take a look at grafana and influxdb, i cant help you by this i dont use HA or its envroiment

great. sidenote, its nearly impossible that the esp send you wrong data, the data from the epever recived was checked with crc, the crc is not unfailable but the chance...

Im Sure that comes from the epever device self. Have you tried tonactivate the ntp sync? The epever have a internal clock thats Not accurate, evt miscalculate it deepens on...

Ich häng mich mal dran in der Hoffnung das es eine Rückmeldung gibt ob noch jemand daran arbeitet / betreut oder man sich auf lange Sicht umorientieren muss

hello, date/time set over sntp is not implemented

Normal ESP and mt50 can exsist in Same wireing. But the ESP is a master and the mt50 too, so i Made a little Timing Trick that both can Work....

No, ESP and/or mt50 must be master That is was master and Slave does, the master ask the Slave, and the Slave answer it. A Slave cant ask a Slave...

There is No solution, thats where modbus Work. When the wrong numbers gone when disconnect the mt50 then my Trick doenst Work for your Setup. When the wrong numbers stay,...

> Ok. Thank you for your explanation! Best way for is then ESP with OLED. > > Device Time: after one Day is clock 1h to late... thats a lot...