Steve Haynal

Hi Alberto, Thank you, but there appear to be more missing files, all in the ip subdirectory: set_global_assignment -name SYSTEMVERILOG_FILE ip / sine_cosine.sv set_global_assignment -name SYSTEMVERILOG_FILE ip / pwm.sv set_global_assignment...

The Hermes-Lite does not support 6M as the max frequency is 61.44/2 MHz. At the least, firmware and software should be updated to people do not try to tune above...

This has been done for two controllers. It should be possible to combine the ADC read controller with the default controller.

Work is underway on this. Plans are for coherent RX and TX.

Thanks John for looking at this. You parts look like good possibilities. I have no ripple spec in mind. I would check the AD9866 datasheet and look around at what...

Some experiments here and small redesign to prevent destruction of Q1 would be helpful.

Include fast path for CW: https://groups.google.com/d/msg/hermes-lite/CnqO2wi1m-4/ZzBxK46hCQAJ

Yesterday I upgraded my HL2b8 to the latest gateware for a build 8 using the N2ADR filter boards on a 64 bit Win10 laptop using the latest Sparkradio SW over...

I've started simplifying the keyer. The idea is to enable it with no side tone. Can be used from the front panel but intended uses is primarily remote use with...

Also, experimenting with connecting a CW key or paddle to a Pro Micro board: https://www.amazon.com/HiLetgo-Atmega32U4-Bootloadered-Development-Microcontroller/dp/B01MTU9GOB Key on/off can be sent to PC as MIDI events with low latency using this...