Jimmy Everling

@simonhq As far as I can tell that error usually indicates an error on Panasonic's end. So just waiting a bit and retrying usually solves the problem. Do you still...

@stenrose Sure I can have a look at adding it. I don't have access to a setup like that, so could you provide a reading when you have something charging...

Hi @TheDK, from what I can tell this is an issue with the Panasonic cloud, and it only affects the energy reading (different api call). It seems to occur when...

@gulli1986 by locking I meant if you have a router where you can enter DNS settings you can specify what IP should be returned. If I run a DNS lookup...

Hi @MichaelRV82, Yeah, that looks off... what version of HA are you on? Does it show the same numbers if you add it as a Grid consumption?

The energy usage looks like it dropped to 0... that could explain the strange reading you are getting because that would cause a delta of what ever your current total...

@MichaelRV82 the old values under energy will not get fixed. You have to reset them, not sure how you can do that. But keep an eye on the new readings...

The sensor is set as total increasing, so that is not the issue. There must be something strange coming from the wallbox... If you look at the Wh sensor does...

Yeah, something is off, there was an issue earlier this year... the charge power were returning a massive value every now and again. Guess there is something similar happening from...

@StarkJohan the Total Energy (kWh) should show the same value as the Metervalue under Energy in the wallbox web UI.