Mark Burton

Sorry for the slow response, I've only just got in from work. It's good that the device is now detected. I think the problem you have now is that the...

Hi, I have added some extra diagnostics to the master branch. It will now print the usage_page and usage of the HID device that is found and it will also...

Sorry, I forgot to add that you will need to define a profile with the new name, e.g. "STM32HI", so you could just duplicate the spacemouse profile and give the...

I've had a dig and found https://github.com/spoter368/os3m-software. Looking at that, I think the event data format is going to be very similar to what the spacemouse provides.

Did your log show any "Unknown spacemouse event" messages? If so, what was the reported len?

I'm pretty certain what needs to be done and have pushed some code to the master branch. You should see some movement but the scaling is probably wrong.

Good sounds like progress. I have pushed another update that should fix the lack of device info. I should think that altering the threshold values should fix the drift.

I've incorporated your config values and made a new release (1.2.2). Let's leave this issue open in case you want to make some further changes.

My Cura 4 variant already provides this capability (along with lots of other tweaks/features). If you want to try it, go to https://github.com/smartavionics/Cura/releases. 

Well, I fixed the non-random random z-seam issue in my own way as you can see here... If you do try my release and have any issues, please open a...