slowtoaccept

KeyError: "['QN_9' 'RF_TU' 'eor'] not found in axis" in execution of "3-dwd_konverter_build_df.ipynb"

5

As instructed, all ipynb files run in sequence. 'Finished file: import\\produkt_tu_stunde_20190409_20201231_00096.txt' 'This is file 10' 'Shape of the main_df is: (851261, 1)' --------------------------------------------------------------------------- KeyError Traceback (most recent call last) in...

Maximum retries exceeded. Response object dump: <Response [503]>

1

### **Simple example code:** from noaa_sdk import NOAA n = NOAA() res = n.get_forecasts('06405', 'US') for i in res: print(i) ### **The following was repeated 5 times** Previous request failed...

TTN Credential Mods to Commissioning.h and LoRaMac-definitions.h

4

Is there another set of instructions on how to do this than https://robotzero.one/heltec-lora32-lorawan-node/? Commissioning.h has 34 lines and I can't find LoRaMac-definitions.h contrary to the instructions.

Arduino Error Message: Could not find boards.txt

1

Following install directions, used git in hardware directory. Received following: Could not find boards.txt in E:\Documents\Arduino\hardware\heltec\InstallGuide. Is it pre-1.5? Could not find boards.txt in E:\Documents\Arduino\hardware\heltec\PinoutDiagram. Is it pre-1.5? Could not...

Arduino: 1.8.12 (Windows Store 1.8.33.0) (Windows 10), Board: "Heltec WiFi LoRa 32(V2), Disabled, default_8MB, 240MHz (WiFi/BT), QIO, 80MHz, 8MB (64Mb), 921600, None" Specified folder/zip file does not contain a valid...

Connectction times out

1

Attempted to connect from simple example: >>> from pprint import pprint >>> import noaa_coops as nc >>> seattle = nc.Station(9447130) requests.exceptions.ConnectionError: HTTPConnectionPool(host='tidesandcurrents.noaa.gov', port=80): Max retries exceeded with url: /mdapi/v1.0/webapi/stations/9447130.json?expand=details,sensors,products,disclaimers,notices,datums,harcon,tidepredoffets,benchmarks,nearby,bins,deployments,currentpredictionoffsets,floodlevels?units=metric (Caused...

Why is the "issues" link to a back-level unsupported version and not the current version noaa_coops https://pypi.org/project/noaa-coops/? Requires a mod to noaa_coops.py C:\Users\Jerry\Python_Projects\Noaa-Coops\lib\site-packages\noaa_coops\noaa_coops.py:356:

Running example code - which IDE?

1

Can you provide instructions on how to test the sample code presented in app-notes?

Using a Blink $25 indoor camera and a $25 Blink synch module, along with Camlytics Single (https://camlytics.com/help/v2/analytics#calibration) s/w for $129 you can save a lot of fiddling. See, too, https://camlytics.com/solutions/calculate-vehicle-speed