shiftingtech
shiftingtech
I dug the file out of F3D, and oriented it for printing.
Based on the work of GadgetAngel, but revised for mantainability. Also draws on https://derekkedziora.com/blog/dark-mode-revisited This may still need some tweaking. Primarily, I'm not happy with the current location of the...
### Is your feature request related to a problem? Please describe In voron #klipper, we're seeing more and more frequent issues with people having ipv6 working in their networks, and...
Added a simple range check to the relative_reference_index, so that having it set too large leads to a reasonable error instead of a confusing index out of range message. Signed-off-by:...
Page 10: "(tested up to 14 tools but test team)" should be "(tested up to 14 tools by the test team)"
Page 8 states "ADDITIONAL TOOLS We provide additional tool recommendations in our sourcing guide. Visit https://vorondesign.com/ sourcing_guide and switch to the “Voron Tools” tab at the bottom of the page"...
on page 4, the manual states "Beware that this project requires a well tuned printer and slicing profile, as there are many press fits and plastic on plastic mechanisms. You...
Manual page 158 refers to the spacers as Thumb Bolts. I don't think this is accurate, I think they should be referred to as "thumb nuts" or "knurled nuts". This...
Mermaid is super handy for flow charts, but the default color scheme doesn't work very well for us
In the macros setup instructions, you use cd `~/klipper_config`, but in new mainsail/fluidd builds, it needs to be `cd ~/printer_data/config`